brake discs & pads replacement in Liverpool

How do front brake discs work?

The brake disc is a metal plate mounted on the wheel hub that is clamped between **2 brake pads **when braking is applied; this causes friction and slows the vehicle down.

How often should brake discs need replacing?

As a rough guide, your brake discs should last between 50k and 70k miles, but there are many variables that could affect this, including driver behaviour, the weight you carry and the speed you travel.

The law, vehicle regulations and your MOT

Incorrect brake function, damaged or excessively worn discs or pads are considered unsafe for your vehicle performance and will cause your car to fail its MOT. Nearly 20% of MOT failures are caused by faulty brakes.

What happens when we replace your front brake discs?

• Our efficient and fully qualified mechanics will inspect the brake system for signs of wear, damage and breakage.
• They will establish which brake discs need to be replaced and fit new ones as necessary.
• You will be advised if any of the brake pads need to be replaced for the best operation and health of your vehicle.
• Once the brake discs have been replaced, our mechanics will test them thoroughly to ensure the correct operation of the new parts, and make any adjustments required for premium performance.

What causes brake discs to stop working correctly?

Brake discs wear out over time from continual use. The friction applied by the brake pads, and the intense heat generated, will eventually deform the disc, causing it to become thinner and less effective when performing its job.

Extended use can also cause brake discs to crack, rendering them ineffective. Scars and rust on the disc can be caused by debris thrown from the road and poor weather conditions; this is also effective in reducing the operation of your brake discs.

Symptoms of malfunctioning brakes discs

Braking causes unusual noises

Loud screeching or grinding noises from your brakes is an indication that there is a problem with either your brake discs or pads.

When your car pulls to one side under braking

If only one brake is working correctly, it can cause your car to pull in the direction of the functioning brake.

The car vibrates under braking

Your brake pads or discs could be warped if the pedal vibrates when you press down on it.

The front brake disc shows signs of damage

Look through the wheel for a visual check—if the disc’s surface isn’t smooth, or it displays cracks, grooves, spots or a blue colourisation, then the disc is quite likely damaged.

Your brake warning light on the dashboard is illuminated

If any of your dashboard warning lights are illuminated, the sensor that detects problems or worn out parts and components has identified an issue and activated the system.